Royal Sovereign RSL-2701U, RSL-380 service manual Replacing Parts, Right Cover

Page 14

3. Replacing Parts

Caution :

Turn off the switch of the machine and then

pull out the power cord plug from the electrical outlet.

3.1. Right Cover

1) Unfasten 4 screws holding the Right

cover and disassemble the Right cover.

<RSL-2701/2701U>

<RSL-380>

2) Pull out the male connector from the Sub-PCB .

3)Unfasten 4 screws holding the Sub-PCB and detach the Sub-PCB.

4)How to assemble is the reverse order of how to disassemble , 3)→2)→1).

12

Image 14

Contents RSL-2701U RSL-380 Wire Diagram TroubleshootingAdjustments Safety Precautions Page Troubleshooting Rollers Not HeatingBi-metal is defective Wire-Temp Fuse is disconnectedMain Fuse is disconnected.except RSL-380 Main PCB is defective Heater in the roller is defectiveMain PCB is defective Temperature Sensor is not workWire thermal fuse is defective Sensor Assy position Wire thermal fuse is defective RSL-2701，RSL-2701URollers Not Running Safety cover is not in proper positionMotor wire connectors are disconnected Film is jammed on the rollers No Main PowerMain power wire is not connected with Main Switch Wire-AC in is not connected with Main PCB.except RSL-380 Transformer is defectivePoor Lamination Quality Replacing Parts Right CoverLeft Cover Rear CoverMain PCB Sub PCB HeatersCross Cutter Replacement of Motor Page Adjustments SVC Parts List SHAFT-TENSION SHAFT-TABLE SVC Parts List RSL-380 Part Name SpecHeater Assy FCHW1 24Ω CUL,UK WIRE-HEATER，LINK Explode View RSL-2701/2701U Expolde View Frame L Frame R Frame, Roller and Other View Wire, Power core and Control PCB RSL-380 Expolde View FRAME-L BRACKET-PRESSURE Frame, Roller and Other View Wire, Front Table and Safety Cover RSL-2701/2701U/380 Wire Diagram AC 220 ~ 240V Wire Diagram Main PCB Layout Connect partFRAME-R Layout 220 ~

Related manuals

Manual 7 pages 15.56 Kb