3. INSTALLATION
Note: The laminator should be installed by a trained service technician.
The laminator comes fully assembled, except for the feed table, paper guide, and heat assembly
The laminator should be located in an area with adequate work space for feeding graphics and lamination materials.
Avoid placing the laminator in a dusty area or near sources of extreme heat or cold.
Once the laminator is in place, lock the casters into position(“ON” position). Always unlock the casters (“OFF” position) when moving to a different location.
ELECTRICAL REQUIREMENTS
Royal Sovereign recommends that a licensed electrician ensuresproper power installation to your laminator in accordance with electrical codes in your area.
The laminator should have a dedicated power line.
MODEL |
|
| |||||||||||
|
| 120V |
|
| 200V | 120V | |||||||
Power Supply | 50/60HZ | 50/60HZ | 50/60HZ |
|
| 50HZ | 50/60HZ | 50/60HZ | |||||
|
|
|
|
|
| single phase |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
120V UL |
| 230V UL | 240V UK |
|
|
|
|
220V EU | 220V AU |
3
RSC Series
4. INCLUDED WITH LAMINATOR
Thoroughly inspect the parts and the unit. It is imperative that any missing parts are reported and a claim is filed with the reseller immediately upon receipt of shipment.
Part Name |
| Quantity | Picture |
Laminator |
| 1 |
|
Owner's Manual |
| 1 |
|
Heating Element Installation Instruction | 1 |
| |
| |||
|
| ||
Registration Card |
| 1 |
|
2"(57mm) / 3´´(76mm) Core Plugs | 6/4 |
| |
Core - Bolts |
| 10 |
|
Dust Cover |
| 1 |
|
Spare Motor Fuse - FUSE(50T) | 1 |
| |
(6.3A) |
|
| |
|
|
| |
Spare Main Power Fuse - FUSE(65TS) | 1 |
| |
(15A) |
|
| |
|
|
| |
8 - Round head 5/16´´(9mm) screw. |
|
| |
8 - Allen/Hex head 3/16´´(5mm) | 10/10 |
| |
(Included with option only) |
|
| |
12 - 3/16"screw (M5 10mm). |
|
| |
! | 5.1) | 12/12 |
|
12 - Spring Washer( |
| ||
Front Feeder(IncludedandwithRearoptionRewinderonly) Kit | 2/2 |
| |
(Included with option only) |
| ||
|
| ||
4