SEAL 44/62 user manual Nut Feet

Page 13

Your 44/62 Ultra Plus must be setup at the place where it will be used. The stand must be placed on a flat level surface.

12.Cut the tie-wraps and remove the blocks that hold the top roller.

13.Inspect the machine for any physical damage.

14.Plug the power cable into the grounded outlet with appropriate service.

The machine must be installed next to an outlet! Do not use extension cords. The plug and the outlet must be easily accessible. Please ensure that you plug your laminator into a grounded, three-prong outlet. Please ensure that the total load of the other items using the same circuit breaker do not exceed its breaking value.

The laminator should only be connected to a power supply outlet of the voltage and amperage marked on the rear panel. The laminator has a grounded plug (three prongs). To reduce the risk of electrical shock, this plug is intended to fit only a grounded outlet of the proper amperage, and in only one way.

3.5.1 Adjustable feet

To secure the stand on the floor, turn the adjustable foot down by hand, until it’s pressed against the floor. Manually lock the adjustable foot with the nut (figure 6).

English

Nut

Feet

Figure 6

Unpacking and Installation

11

Image 13
Contents 44/62 Ultra Plus English Français Deutsch Español Italiano 44/62 Ultra PlusIntroduction Table of Contents Loading the machine Application ProcessesTechnical Specifications SpecificationsElectrical specifications Safety symbols used on the equipment Safety / Important SafeguardsEmergency stop-buttons Power supply Unpacking and InstallationAmbient Conditions SurroundingsSetting up the laminator in 4 steps Page Nut Feet Unit Description Motor control Control panelPage Unwind brakes Roller nip settingsImage guide storage place Application Process Control SheetLoading the machine Application ProcessesPage Webbing the films Page Feeding images Laminating and adhesive coating Decaling Decaling without liner Mounting Encapsulating Pre-Coating Mounting using a ProSEAL Mounting Board10Mounting and Lamination using a ProSEALpouch Board Application Processes Maintenance & Cleaning Troubleshooting Glossary of Terms Limited Warranty Index

44/62 specifications

SEAL 44/62 is a notable vessel in the realm of modern naval architecture, epitomizing cutting-edge technology and design for maritime operations. Classed as a versatile multi-role vessel, the SEAL 44/62 stands out for its ability to perform a wide array of missions, including surveillance, reconnaissance, and special operations.

One of the main features of the SEAL 44/62 is its advanced hull design, which incorporates a lightweight composite material that enhances speed and maneuverability. The vessel employs a streamlined form that is optimized for hydrodynamic efficiency, allowing it to travel at high speeds while minimizing wake and radar signature. This is crucial for stealth missions where the element of surprise is paramount.

Propulsion is another key characteristic of the SEAL 44/62. Equipped with hybrid propulsion systems, it combines traditional diesel engines with electric motors. This dual capability not only provides efficient fuel consumption during extended operations but also allows for silent running, making it harder to detect by enemy forces or anti-submarine warfare technologies.

The vessel’s onboard technology features a state-of-the-art command and control system that integrates artificial intelligence to enhance situational awareness. This system allows operators to assess threats in real time and coordinate responses seamlessly. Additionally, advanced radar and communication systems ensure that the SEAL 44/62 can maintain secure and reliable contact with command centers and allied units.

In terms of versatility, the SEAL 44/62 is designed with modular capabilities that can be customized based on mission requirements. It can be outfitted with various mission payloads, including unmanned aerial vehicles (UAVs), remotely operated underwater vehicles (ROVs), and different sensor packages, facilitating missions ranging from intelligence gathering to combat support.

Furthermore, the SEAL 44/62's interior is designed for operability and comfort. The vessel accommodates a crew of skilled operators while ensuring they have access to all necessary facilities for extended deployments. The ergonomic workspace is equipped with modern technology that enhances efficiency and effectiveness.

Overall, the SEAL 44/62 represents a significant advancement in naval vessel design, showcasing a blend of speed, stealth, and versatility. Its advanced technologies and adaptable features make it a formidable asset in modern maritime operations, reflecting the evolving needs of naval warfare.