SEAL 44/62 user manual Introduction

Page 4

INTRODUCTION

We would like to thank you for purchasing a Seal 44/62 Ultra Plus, designed to give you many years of reliable service. By following the guidelines outlined in this manual for proper care and use, you can depend on many years of trouble-free profitability from your investment.

Your 44/62 Ultra Plus laminator meets the CE Machinery Safety Directive (89/392/EEC, including 91/368/EEC, 93/44/EEC and 93/68/EEC) and is ETL listed (UL 1950/EN60950).

Statement of intended use.

The 44/62 Ultra Plus laminator has been designed to be used with Seal materials. When used with this products, you are able to mount, mount and laminate, and encapsulate prints in one step. Your machine has not been tested with any other materials and is not recommend for use with products other than Seal supplies.

WARNING:

THIS MACHINE IS DESIGNED FOR MOUNTING AND LAMINATING. ANY USE OTHER THAN THE INTENDED MAY CAUSE DAMAGE TO THE MACHINE OR PHYSICAL HARM TO THE USER.

Liability Statement

The details given in this manual are based on the most recent information available to us. They may be subject to change in the future. We retain the right to make changes to the construction or the design of our products without accepting any responsibility for modifying earlier versions previously delivered.

Standardized Symbols

Passages marked this way offer an idea / tip or other information on the efficient use of this unit.

WARNING:

PLEASE PAY ATTENTION TO ALL PASSAGES MARKED THIS WAY. THIS INFORMATION IS VITAL TO PREVENTING USER INJURY AND / OR DAMAGE TO THE UNIT. FAILURE TO FOLLOW THIS INFORMATION COULD VOID THE USER’S WARRANTIES AND TRANSFER ALL SAFETY OBLIGATIONS TO THE USER.

2

Introduction

Page 3 Page 5
Image 4
Page 3 Page 5
Contents 44/62 Ultra Plus English 44/62 Ultra Plus Français Deutsch Español ItalianoIntroduction Table of Contents Application Processes Loading the machineSpecifications Technical SpecificationsElectrical specifications Safety symbols used on the equipment Safety / Important SafeguardsEmergency stop-buttons Unpacking and Installation Power supplyAmbient Conditions SurroundingsSetting up the laminator in 4 steps Page Nut Feet Unit Description Control panel Motor controlPage Unwind brakes Roller nip settingsImage guide storage place Process Control Sheet ApplicationApplication Processes Loading the machinePage Webbing the films Page Feeding images Laminating and adhesive coating Decaling Decaling without liner Mounting Encapsulating Mounting using a ProSEAL Mounting Board Pre-Coating10Mounting and Lamination using a ProSEALpouch Board Application Processes Maintenance & Cleaning Troubleshooting Glossary of Terms Limited Warranty Index

44/62 specifications

SEAL 44/62 is a notable vessel in the realm of modern naval architecture, epitomizing cutting-edge technology and design for maritime operations. Classed as a versatile multi-role vessel, the SEAL 44/62 stands out for its ability to perform a wide array of missions, including surveillance, reconnaissance, and special operations.

One of the main features of the SEAL 44/62 is its advanced hull design, which incorporates a lightweight composite material that enhances speed and maneuverability. The vessel employs a streamlined form that is optimized for hydrodynamic efficiency, allowing it to travel at high speeds while minimizing wake and radar signature. This is crucial for stealth missions where the element of surprise is paramount.

Propulsion is another key characteristic of the SEAL 44/62. Equipped with hybrid propulsion systems, it combines traditional diesel engines with electric motors. This dual capability not only provides efficient fuel consumption during extended operations but also allows for silent running, making it harder to detect by enemy forces or anti-submarine warfare technologies.

The vessel’s onboard technology features a state-of-the-art command and control system that integrates artificial intelligence to enhance situational awareness. This system allows operators to assess threats in real time and coordinate responses seamlessly. Additionally, advanced radar and communication systems ensure that the SEAL 44/62 can maintain secure and reliable contact with command centers and allied units.

In terms of versatility, the SEAL 44/62 is designed with modular capabilities that can be customized based on mission requirements. It can be outfitted with various mission payloads, including unmanned aerial vehicles (UAVs), remotely operated underwater vehicles (ROVs), and different sensor packages, facilitating missions ranging from intelligence gathering to combat support.

Furthermore, the SEAL 44/62's interior is designed for operability and comfort. The vessel accommodates a crew of skilled operators while ensuring they have access to all necessary facilities for extended deployments. The ergonomic workspace is equipped with modern technology that enhances efficiency and effectiveness.

Overall, the SEAL 44/62 represents a significant advancement in naval vessel design, showcasing a blend of speed, stealth, and versatility. Its advanced technologies and adaptable features make it a formidable asset in modern maritime operations, reflecting the evolving needs of naval warfare.
Top Page Image Contents