Loading Single-Sheet Paper
The single-sheet path is best for letterhead stationery, memos, and envelopes and is recommended for printing graphs and charts because it provides the most accurate control of the paper.
!If you have any continuous-form paper in the paper path, you must press the PARK button on the front panel to remove it from the path before load- ing single sheets.
1.Make sure the printer is turned ON and deselected (SEL light off—press SEL button to deselect if neces- sary).
The ALARM light will remain on until paper is
4loaded.
2. Move the paper lever to the position marked “TOP”.
3.Grasp the back of the paper separator and unsnap it from the housing, then swing it up into the single-sheet feed position, making sure that the wire feed guide ( ) is nestled in the separator.
