Menu Mode
When your printer is in the Menu Mode, you can use the front panel controls to change the defaults for the printer parameters, including emulation, page length, line spacing, typeface, pitch, etc. The changes you make in the Menu Mode will automatically be saved in your printer’s memory when you exit the Menu Mode and will be retained even if you turn the printer off.
!If you are in the Menu Mode and turn the printer off without first exiting, any changes you have made in the menu will be lost.
Entering The Menu Mode
To place your printer in the Menu Mode hold the SHIFT button while pressing the SEL button. The MENU light will come on and, if the printer was selected, the SEL light will go out.
Exiting The Menu Mode
To exit the Menu Mode, hold the SHIFT button and press the SEL button. The MENU light will go out and the SEL light will come on.
Resetting The Menu
To reset the Menu to the factory defaults, turn the printer off, then hold the SEL and LF buttons while turning it back on.
Printing Out the Menu
To print out the menu settings engaged, enter the Menu Mode, then press the PRINT button.