With Forms Tear-Off Set to ON
SEL |
|
|
|
|
|
SEL |
| LF | FF/LOAD | TEAR | PARK QUIET |
MENU | SHIFT | Micro Feed | Micro Feed |
| TOF |
|
| Down | Up |
|
|
EXIT |
| GROUP | ITEM | SET | |
POWER | ALARM | MENU |
|
|
First: Check/Set the Tear Position
1.Turn the printer ON and press PARK to remove the paper from the path.
The alarm light comes on.
2.Press SHIFT and QUIET/TOF to reset the Top of Form.
3.Press FF/LOAD to pull the paper back in. The Alarm light goes out.
4.Press SELECT to take the printer
5.Wait until the paper moves up to the Tear position.
6.To change the
Next, Set the Top of Form Position
1.Press SHIFT and TEAR.
The paper goes to the current TOF position.
2.Continue holding SHIFT and release TEAR.
3.Continue holding SHIFT, then press LF/Micro Feed Up to move the TOF location down on the page or FF/ LOAD/Micro Feed Down to move the TOF location up.
!The first line of printing is indicated by the red line (1) on the printhead’s plastic shield.
1
4.Keep holding the SHIFT button and press the QUIET/TOF button a few times to engage the new setting.
5.Press SELECT to place the printer back on line.