Oki B6200 Series manual Preparing a Location for the Printer, Space Requirements, Environment

Page 12

PREPARING A LOCATION FOR THE PRINTER

Place the machine on a level and sturdy surface that can withstand the machine weight – 20.4 kg (45lb) (B6200) or 22.6 kg (50lb) (B6300). If tilted, the machine may fall over and cause injuries.

SPACE REQUIREMENTS

The printer has ventilation holes on the side and rear panels. Ensure that the printer is installed with a minimum clearance of 255mm (10in) from the rear vent to any wall, 200mm (8in) from the left vent to any wall, and 300mm (12in) from the right vent to any wall. A poorly ventilated machine can cause excessive internal heat and fire. The following diagram shows the minimum clearances required for normal operation, consumables replacement, and maintenance to ensure your machine operates at peak performance.

200 mm

255 mm

8’’

10”

 

402 mm

 

16”

300 mm

 

 

12”

* B6200

ENVIRONMENT

Ensure that the installation location meets the following conditions:

Do not place the printer in a hot, humid, dusty or poorly ventilated environment. Prolonged exposure to such adverse conditions can result in fire or electric shock.

12 > INSTALLATION AND RELOCATION PROCEDURE

Image 12
Contents Page Preface FCC Statement Contents Contents Introduction WelcomeFeatures Overview About this Guide ConventionsInstallation and Relocation Procedure Safety PrecautionsHandling the Printer Checking the Package Contents Locating Parts of the Printer Menu system onPreparing a Location for the Printer Space RequirementsEnvironment Installation and Relocation Procedure Installing the Face UP Rear Tray Installing the Optional Accessories Installing a Universal Tray Installation and Relocation Procedure Installation and Relocation Procedure Installation and Relocation Procedure Installation and Relocation Procedure Installing the Duplex Unit Installation and Relocation Procedure Installing the Offset Catch Tray Installation and Relocation Procedure Installation and Relocation Procedure Installation and Relocation Procedure Installation and Relocation Procedure Installing a Network Software KIT Refer to Preparing the printer onRefer to Closing the printer on Installing a Hard Disk Refer to Closing the printer on Installing a Compact Flash Disk Close the fastener Installing Additional Memory Installing the DRUM-TONER Cartridge Installation and Relocation Procedure Installation and Relocation Procedure Connecting AN Interface Cable Connecting the Power Cord Loading Paper Installation and Relocation Procedure Installation and Relocation Procedure Control Panel and Menu System FEED/SELECTScreen Switch between the menu levels Navigating the Control Panel MenusSelecting the Control Panel Language Printing a Configuration Summary Setting Printer Configurations VIA a WEB Installing the Printer Driver Microsoft Windows SystemsIf the New Hardware Found Wizard displays Install Printer Software Utilities Install the Driver Macintosh OS 9.1+Activate the Duplex Unit and Additional Options Macintosh OS X.1+ Adding the Printer for USBAdding the Printer for a Network Printing a Test Document If Paper Jams If Paper Jams Inside Cover a Inside the Paper Tray If Paper Jams Error Messages Message content ReferenceOff-line Index Limited Warranty United States and Canada ON-SITE RepairLimited Warranty United States and Canada OKI Data Americas Service Centers Canada