2.Place the tray module to be installed at the bottom level on a flat surface, then pull out the paper tray.
NOTE
Proceed to step 6 if you are installing only one tray module.
3.Lift the tray module to be installed at the top level by holding the parts as shown in the diagram.
4.Align the front and back corners of the top and bottom tray modules, and slowly lower the top module so that the guide pins at the four corners of the bottom module fit into the holes at the base plate of the top module.
CAUTION!
The tray module must be lowered gently. Otherwise, the interior parts may be damaged.