CONNECTING THE POWER CORD
When connecting the power cord, take heed of the information given in “Safety precautions” on page 9.
1. Ensure that the printer power switch is in the <> position.
2. Connect the power cord to the power cord connector at the back of the printer. Connect the other end of the power cord to the power outlet.
3. Press the power switch of the printer
to the < > position. The power will be applied and the control panel will display that the printer is ready to print.
NOTE
>If “Found New Hardware” displays on your screen, click Cancel.
>Depending on the network environment used, it may take some minutes before the printer is ready for printing.
>If the message that the printer is ready to print but is unable to retrieve an IP Address is displayed, continue operating as normal.