PRINTING A CONFIGURATION SUMMARY
To check whether the printer is correctly installed, use the control panel to print the [System Settings List].
NOTE
If you have made a mistake when operating the control panel, press the <MENU> button to restart. For details on how to operate the control panel, refer to “The Control Panel and Menu system” on page 43.
1.Press the <MENU> button to display the Menu screen.
2.Press the < 
> or < > button until [Report/List] is displayed,
then press the < > button.
3.Press the < 
> or < > button until [System Settings] is
displayed, then press the < > button.
4.Press the <FEED/SELECT> button.
The [System Settings List] will be printed.
5.Press the <MENU> button when printing has completed.
NOTE
>The layout of the [System Settings List] may differ depending on the configuration and settings of the printer.
>For B6300, [Rear Output Tray] is displayed in the column for Output Device even when the rear tray is not installed.
>Reports/lists cannot be output to the face up (rear) tray. When the face up (rear) tray is installed, lower the face up (rear) tray output lever.