Network connection
Note 1: An optional Ethernet network interface card (NIC) is needed for connection to a network. For information on installing a network interface card, refer to Chapter 8 Optional Accessories.
Note 2: Administrator’s authority is required when installing using a network connection.
Operating environment
MacOS 8.5 or above, running on a Macintosh computer with EtherTalk interface.
Connection
1.Confirm that the power is off to the printer.
2.Connect a network interface cable (twisted pair) into the NIC socket in the printer.
3.Connect the other end of the network interface cable into the network socket.
4.Switch on the printer.
5.For further details on how to configure network connection, refer to the relevant section in the user’s guide for the network interface card.
English
Printer driver installation
Either the Adobe PostScript printer driver or Laser- Writer printer driver can be used. However, for the Adobe PostScript printer driver 8.7, only MacOS 8.5 or higher can be used.
1.Place the Printer Software
2.Open the [Driver] folder.
3.
4.Click [Continue] in the Adobe PostScript Diver screen and follow the on screen instructions.
5.After installation of the driver, restart the computer and the Adobe PS icon should appear in the Chooser.
6.Open [Chooser] in the Apple menu.
7.Click on [Adobe PS] and select Printer name.
Note 1: If using an Ethernet network interface card, the printer name is OP and the last six digits of the Ethernet address.
Note 2: Printer name is given as Object name in the self diagnostic test for the network interface card.
Chapter 3 - Macintosh Setup | 47 |