Printing position
Reverse Paper Feed ò
Forward Paper Feed ñ
Notes
1.The mechanical form stopper is adjustable in the range 26.5 to 36.5 mm (1.04" to 1.44")
2.The TOF and BOF sensors are fixed and cannot be adjusted.
3.After slip paper is set at the mechanical form stopper, the top margin can be shortened up to 21.2 mm (.83") by feeding the paper backwards (ejection feeding).
4.When ejection feeding is not performed after printing, printing can be performed up to the position at which the paper edge is no longer held by the paper feed roller (13.8 mm) (.54") from the paper edge).
5.When ejection feeding is performed after printing, the paper can be fed forward up to 11.8 mm (.46") (28 dots) after the bottom edge is detected.
Reference Information