Epson PA-295 operating instructions

Page 9

This printer requires an external power supply. The EPSON Power Supply PS-150 is recommended.

Using an incorrect power supply can cause serious damage to the printer.

1.Make sure that the power supply is turned off.

2.Plug the power supply's cable into the printer's connector as shown below. Note that the flat side of the connector faces up.

PA-295

PA-295P

3.Plug the power cord into an outlet.

1-8Installation

Image 9
Contents PA-295 PA-295PA-295P Installation 2Installation PA-295 PA-295 Page Thickness of wireAWG 18 or equivalent Page For instructions on replacing a used ribbon, see Chapter Installation Page To Perform the self test, follow the steps below Page Page Transmission Speeds Buttons Paper OUT Page Power Problems Printing Method Head Wires Printing Direction Character size Papertype Total thickness Page Printing position Electrical Specifications Reliability Environmental Conditions