Epson PA-295 operating instructions Thickness of wireAWG 18 or equivalent

Page 8

You need an appropriate ground wire to ground your printer. Recommended wire is described below.

Thickness of wire:AWG 18 or equivalent

Diameter of terminal to be attached: 3.2

IMake sure that the printer is turned off.

2.Connect the ground wire to the printer using the FG screw on the back of the printer, as shown.

PA-295

PA-295P

Installation 1-7

Page 7 Page 9
Image 8
Page 7 Page 9
Contents PA-295 PA-295PA-295P Installation 2Installation PA-295 PA-295 Page Thickness of wireAWG 18 or equivalent Page For instructions on replacing a used ribbon, see Chapter Installation Page To Perform the self test, follow the steps below Page Page Transmission Speeds Buttons Paper OUT Page Power Problems Printing Method Head Wires Printing Direction Character size Papertype Total thickness Page Printing position Electrical Specifications Reliability Environmental Conditions
Top Page Image Contents