Epson PA-295 operating instructions For instructions on replacing a used ribbon, see Chapter

Page 10

Be sure to use a ribbon cassette that meets the printer's specifications. The EPSON ERC-27 is recommended.

• Note:

For instructions on replacing a used ribbon, see Chapter 2.

1.Turn the printer on using the power switch on its left side.

2.Press the RELEASE button to turn the light on. This puts the printer in the paper release mode.

3.Turn the printer off.

Installation 1-9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents PA-295 PA-295PA-295P Installation 2Installation PA-295 PA-295 Page Thickness of wireAWG 18 or equivalent Page For instructions on replacing a used ribbon, see Chapter Installation Page To Perform the self test, follow the steps below Page Page Transmission Speeds Buttons Paper OUT Page Power Problems Printing Method Head Wires Printing Direction Character size Papertype Total thickness Page Printing position Electrical Specifications Reliability Environmental Conditions
Top Page Image Contents