Orion Car Audio 3002 Amplifier Installation, Choosing Mounting Locations, Passenger Compartment

Page 10

Tri-Mode Three Channel Configuration

Lowest recommended impedance is 2W stereo and 4W bridged mono.

Stereo operation must be used.

Outputs must be configured for full range operation

Output is configured stereo and summed bridged.

Passive crossover frequencies must not overlap.

WARNING! Failure to observe these requirements may result in damage to the amplifier.

AMPLIFIER INSTALLATION

Choosing Mounting Locations

The location of your amplifier will depend on several important issues. Due to the low pro- file size of the Orion amplifiers, there are many possible installation locations that will yield satisfactory amplifier performance. Always mount the amplifier in a place that protects the amplifier from the elements. In addition, mount the amplifier on a stable, flat surface.

NOTE: Mounting amplifiers upside down is not recommended and may cause premature thermal shutdown.

WARNING! Do not mount any amplifier in the engine compartment. Amplifiers are not designed to endure the harsh environment of the exterior elements.

Passenger Compartment

If you are going to mount the amplifier in the passenger compartment, make sure you have adequate room for ventilation. The amplifiers have been designed to make under-seat mounting possible. When mounting your amplifier under a seat or similar area, keep a min- imum of 1" of clearance around the amplifier for adequate cooling.

Trunk Compartment

Mounting your amplifier in the trunk provides excellent performance as long as you do not restrict the airflow around the heatsink of the amplifier. For optimal results, mount the

©2003 Directed Electronics, Inc.

9

Image 10
Contents Page Contents Practice Safe Sound IntroductionWhat’s in the Box Limited TWO-YEAR Consumer Warranty Record Your Serial Number and DateSpecifications Amplifier Section OrionEND Panel Layout Internal Crossover Configuration Amplifier SettingsStereo / Mono Input Configuration Input GainPower Connections Amplifier WiringSpeaker Connections Summed Bridged Configuration Passenger Compartment Amplifier InstallationChoosing Mounting Locations Trunk CompartmentGeneral Precautions and Installation Tips Tools of the TradeStep By Step Installation Testing the System SET UP and TroubleshootingAdjusting the Sound of the System Directed Electronics, Inc Troubleshooting Tips Symptom Probable Cause Action To TakeInternal Crossover Configuration Directed Electronics, Inc Warranty

3002, 2002 specifications

Orion Car Audio is renowned for its dedication to delivering high-performance audio systems for automotive enthusiasts. Among their standout products are the Orion Car Audio 3002 and 2002 amplifiers, which are both appreciated for their excellent sound quality and robust build.

The Orion 3002 is a powerful 2-channel amplifier designed to drive high-performance speakers with ease. With an output power of 300 watts RMS, it is capable of delivering dynamic sound reproduction that can elevate any listening experience. One of its notable features is its high-and low-pass filters, which allow users to tailor the audio output to match their specific preferences and vehicle acoustics. Additionally, the Orion 3002 comes equipped with a variable gain control, enabling users to adjust the input sensitivity to maximize sound fidelity without distortion.

In contrast, the Orion 2002, while slightly less powerful at 200 watts RMS, shares many of the same technologies that make the 3002 a favorite among car audio enthusiasts. Its compact design makes it easy to install in a variety of vehicle types, ensuring that quality sound is accessible to all. The 2002 also includes a temperature protection circuit to prevent overheating, which extends the life of the amplifier and ensures consistent performance even during prolonged use.

Both models are built with durability in mind, featuring rugged aluminum extruded heatsinks that dissipate heat efficiently and maintain optimal performance. This durability is paired with a sleek aesthetic that complements modern vehicle interiors.

Another significant characteristic of both the Orion 3002 and 2002 is their compatibility with a range of subwoofers. This flexibility allows users to create their own tailored sound systems suited to their individual preferences. Additionally, the amplifiers feature low-frequency response capabilities that enhance bass performance, delivering rich and powerful low-end sound that is essential for a complete audio experience.

Overall, the Orion Car Audio 3002 and 2002 are exemplary choices for those seeking to upgrade their car audio systems. With their powerful output, advanced technologies, and durable construction, they provide users with a high-fidelity audio experience that can satisfy even the most discerning audiophiles. Whether you are cruising down the highway or parked at a tailgate, these amplifiers are designed to deliver a soundtrack that brings life to any journey.