Orion Car Audio 2002, 3002 manual Amplifier Settings, Stereo / Mono Input Configuration, Input Gain

Page 7

AMPLIFIER SETTINGS

Stereo / Mono Input Configuration

The STEREO / MONO switch allows the Orion 2002 and 3002 amplifiers to use a single RCA or high-level input to feed signal to both the right and left channels of the amplifier.

When the switch is to the right (MONO position), signal from the left input is routed to the right channel. This is the preferred mode when bridging the amplifier into a single speak- er. When the switch is to the left (STEREO position), right and left inputs are independent. This allows a source unit with an internal balance to change the stereo imaging.

Internal Crossover Configuration

The Orion 2002 and 3002 amplifiers use a multi-position switch to determine the crossover configuration. The multi-position switch is located on the adjustment side of the amplifier. Listed below are the switch positions and their respective crossover configurations.

When the switch is to the left (FULL position), the crossover section of the amplifier is bypassed. Amplifier output is full range. When the switch is in the center (HIGH position), the crossover is configured for high-pass operation. The crossover is fixed at 100Hz at 12dB per octave. When the switch is to the right (LOW position), the crossover is configured for low-pass operation. The crossover is fixed at 100Hz at 12dB per octave.

Input Gain

The Orion 2002 and 3002 amplifiers have gain adjustments with an input sensitivity range from 200mV up to 5V on the RCA inputs and 1V to 10 on the high-level inputs. This allows easy integration from any source unit either with RCA outputs or speaker outputs. Refer to the Testing the System and the Adjusting the Sound of the System sections for detailed instructions on setting up the level controls.

INTELLi Bass Control

INTELLi Bass maximizes the performance of a subwoofer. INTELLi Bass allows for continuous adjustment of low frequency boost. INTELLi Bass is a variable Q and variable frequency low frequency boost. INTELLi Bass can be adjusted from 0dB of boost to 10dB of boost centered at 45Hz. Initially the Q is very low. As INTELLi Bass is added, the Q becomes sharper. This allows the Orion 2002 and 3002 to overcome acoustic deficiencies in your vehicle. The type of enclosure used, the sub-woofer's excursion capability, personal preference, and attitude determine acceptable boost levels.

WARNING! Exercise caution when setting INTELLi Bass. Maximum boost can potentially cause woofer damage due to overexcursion.

6

©2003 Directed Electronics, Inc.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Page Contents Practice Safe Sound IntroductionWhat’s in the Box Record Your Serial Number and Date Limited TWO-YEAR Consumer WarrantyAmplifier Section Orion SpecificationsEND Panel Layout Input Gain Amplifier SettingsStereo / Mono Input Configuration Internal Crossover ConfigurationPower Connections Amplifier WiringSpeaker Connections Summed Bridged Configuration Trunk Compartment Amplifier InstallationChoosing Mounting Locations Passenger CompartmentTools of the Trade General Precautions and Installation TipsStep By Step Installation Testing the System SET UP and TroubleshootingAdjusting the Sound of the System Directed Electronics, Inc Symptom Probable Cause Action To Take Troubleshooting TipsInternal Crossover Configuration Directed Electronics, Inc Warranty

3002, 2002 specifications

Orion Car Audio is renowned for its dedication to delivering high-performance audio systems for automotive enthusiasts. Among their standout products are the Orion Car Audio 3002 and 2002 amplifiers, which are both appreciated for their excellent sound quality and robust build.

The Orion 3002 is a powerful 2-channel amplifier designed to drive high-performance speakers with ease. With an output power of 300 watts RMS, it is capable of delivering dynamic sound reproduction that can elevate any listening experience. One of its notable features is its high-and low-pass filters, which allow users to tailor the audio output to match their specific preferences and vehicle acoustics. Additionally, the Orion 3002 comes equipped with a variable gain control, enabling users to adjust the input sensitivity to maximize sound fidelity without distortion.

In contrast, the Orion 2002, while slightly less powerful at 200 watts RMS, shares many of the same technologies that make the 3002 a favorite among car audio enthusiasts. Its compact design makes it easy to install in a variety of vehicle types, ensuring that quality sound is accessible to all. The 2002 also includes a temperature protection circuit to prevent overheating, which extends the life of the amplifier and ensures consistent performance even during prolonged use.

Both models are built with durability in mind, featuring rugged aluminum extruded heatsinks that dissipate heat efficiently and maintain optimal performance. This durability is paired with a sleek aesthetic that complements modern vehicle interiors.

Another significant characteristic of both the Orion 3002 and 2002 is their compatibility with a range of subwoofers. This flexibility allows users to create their own tailored sound systems suited to their individual preferences. Additionally, the amplifiers feature low-frequency response capabilities that enhance bass performance, delivering rich and powerful low-end sound that is essential for a complete audio experience.

Overall, the Orion Car Audio 3002 and 2002 are exemplary choices for those seeking to upgrade their car audio systems. With their powerful output, advanced technologies, and durable construction, they provide users with a high-fidelity audio experience that can satisfy even the most discerning audiophiles. Whether you are cruising down the highway or parked at a tailgate, these amplifiers are designed to deliver a soundtrack that brings life to any journey.
Top Page Image Contents