Epson T70 specifications Selecting the Print Density DIP Switch 2-3/2-4, Function SW2-4

Selecting the Print Density (DIP Switch 2-3/2-4)

Function	SW 2-3	SW2-4
Low power consumption mode	ON	ON
Print density (Standard)	OFF	OFF
Print density (Darker than standard)	ON	OFF
Print density (Dark)	OFF	ON

•If the print density is set to “Darker than standard” or ”Dark” level, printing speed may be

reduced.

•The print density can be set with DIP switches (2-3/2-4) or the customized value. (See "Setting the Memory Switches" on page 38.) The initial setting of the customized value is “Depends on the DIP switch settings.” If the customized value is changed, the value set with the customized value is enabled.

36