Epson T70 specifications Factory, Off

DIP Switch Bank 2

SW	Function	ON		OFF	Factory
					setting
2-1	Handshaking (BUSY condition)	Receive buffer full	• Offline		OFF
			• Receive buffer full
2-2	Reser ved (Do not change	Fixed to OFF			OFF
	settings)
2-3 ∼	Selects pr int density/Low	See "Selecting the Print Density (DIP Switch			OFF
2-4	power consumption mode	2-3/2-4)" on page 36.
2-5	Reserved	—		—	OFF
2-6	Reser ved (Do not change	Fixed to OFF			OFF
	settings)

2-7

I/F pin 6 reset signal

Enabled

Disabled

OFF

2-8

IF pin 25 reset signal

Enabled

Disabled

OFF

•For DIP switch 2-1 (BUSY condition), see also "Selecting the BUSY Status" on page 37.

•Do not change the setting of DIP switches 2-2 and 2-6. Otherwise, the printer may not operate normally.

34