Epson T70 specifications Led

Chapter 2 Setup

Connect a 10/100BASE-T cable to the 10/100BASE-T LAN connector by pressing firmly until the

connector clicks into place.

10/100BASE-T LAN interface connector

		016(146'.'%1//70+%#6+1075'
		-'+06'.'(10#05%*.755/
LED	LED		Switch
(Green)	(Yellow)
			Press down the switch for a
			while when the power is on to
			initialize to the factory settings.

To use the LAN interface, the IP Address Setup Utility for UB-E02 is required. For detailed information about the setup methods, see the UB-E02 Technical Reference Guide. You can obtain the IP Address Setup Utility for UB-E02 and the UB-E02 Technical Reference Guide from one of the following URLs or ask your dealer:

•For customers in North America, go to the following web site: http://www.epsonexpert.com/

•For customers in other countries, go to the following web site: http://www.epson-pos.com/

2

45