BIXOLON SRP-F310, SRP-F312 user manual Setting the Dip Switches, Xon/Off Dtr/Dsr, Odd Off

SRP-F310/312

1-4 Setting the Dip Switches

1-4-1 Serial Interface

SW	Function	ON	OFF	Default
1-1	Auto-Cutter Selection	Disable	Enable	OFF
1-2	Handshaking	XON/OFF	DTR/DSR	OFF
1-3	Word length	7 bits	8 bits	OFF
1-4	Parity check	Yes	No	OFF
1-5	Parity selection	EVEN	ODD	OFF
1-6	Baud rate selection	Refer to the Following Table 1		OFF
1-7				ON
1-8				OFF

	DIP switch 1 Setting Function
			SW1 – 8
Transmission speed	SW1 – 6	SW1 – 7		Default
2400 baud	ON	OFF	OFF
4800 baud	ON	OFF	ON
9600 baud	OFF	ON	OFF	9600
19200 baud	OFF	OFF	OFF
38400 baud	OFF	ON	ON
57600 baud	OFF	OFF	ON
115200 baud	ON	ON	ON

Table 1 - Baud Rate Selection

1-4-2 Parallel & USB Interface

SW	Function		ON	OFF	Default
1-1	Auto-Cutter Selection		Disable	Enable	OFF
1-2	Reserved		-	-	OFF
~
1-8
		DIP switch 1 Setting Function

※Auto Cutter Enable / Disable selection

Dip Switch Set 1

SW1 - 1	ON	Auto Cutter Disable
	OFF	Auto Cutter Enable
Application	Ignores Auto Cutter error for continuous printing

Rev. 1.00 - 11 -