Barco 12X8, 32X32, matrixpro-II 12x8 Setup Mode, Main Setup Menu, Input Setup Menu, Input Number

SETUP MODE

MAIN SETUP MENU PAGE

The MatrixPRO-II is initially setup from the front panel LCD screen on the rack. To enter the setup pages, press the UP and DOWN buttons simultaneously. The front panel will display the main setup menu page:

SELECT

MAIN SETUPS

>INPUT SETUP OUTPUT SETUP SYSTEM SETUP PRESET SETUP RESET MATRIX

ESCAPE

A ">" cursor is used to point to a menu option. The ">" cursor is moved up and down using the UP and DOWN arrow buttons to the right of the LCD screen. Pressing the SELECT button causes the front panel to enter the menu or sub-menu page that is next to the cursor. The ">" will change to a "*" to indicate that the selected menu option is selected and ready to be adjusted. The up and down arrow buttons are then used to make the actual setting adjustment. When satisfied with the setting, pressing the select button will save the selection. Pressing ESCAPE a second time will return to the main operating page.

NOTE:The LCD display will automatically return to the main operating page after 45 seconds of inactivity.

INPUT SETUP MENU PAGE

Pressing the up and down buttons to position the ">" cursor next to INPUT SETUP then pressing the SELECT button will display the input setup menu pages. The INPUT SETUP page will default to Input 01.

SELECT

INPUT SETUP

>INPUT	NUMBER	01
AUDIO	TYPE	CON
INPUT	TRIM	-5 dB
VIDEO	TYPE	NATIVE
CABLE	LENGTH	0
		SAVE

ESCAPE

INPUT NUMBER

This function is used to select which input to setup. At the “>“ prompt either press an input button to select that input or change the input number by positioning the cursor to INPUT NUMBER Press the

MatrixPRO- II 21