Barco matrixpro-II 12x8, 12X8, 32X32 manual Cable Length Input

SELECT

SPLIT SETUP

>A RGB

B RGB

C RGB

SAVE

ESCAPE

The "A-B-C" (labeled R-G-B on the unit) designations refer to the physical location of the video cards from top to bottom in the MatrixPRO-II chassis Pressing the UP and DOWN buttons will scroll through the five available configurations. In this example the input is set to one S-video and one Composite video

SELECT

SPLIT SETUP

*A SVIDEO

B SVIDEO

C COMPOSITE

SAVE

ESCAPE

Pressing SAVE will store the selected configuration for that input. The user can then select another input to set up, or press the ESCAPE button to return to the INPUT SETUP menu.

CABLE LENGTH (Input)

CABLE LENGTH gives the user the ability compensate for the length of cable from the source to the MatrixPRO-II. The user will scroll down to CABLE LENGTH press SELECT. The user will then use the UP and DOWN buttons to adjust the cable length from 00’to 150’ in 10 foot lengths. When finished the user will press SELECT to save the setting.

NOTE: A final phase adjustment of the display should be performed after cable EQ adjustments are completed to optimize the image quality

MatrixPRO- II 23