The screen for the preset setup will look like this:
SELECT
PRESET SETUP
>PRESET NUMBER SAVE ALL OUTPUTS SAVE SELECTED
ESCAPE
The user can choose a preset number either by pressing an input or output button or using the UP, DOWN and SELECT buttons. If the user wishes to save the current settings as the preset, the user will position the cursor to SAVE ALL OUTPUTS and presses SAVE.
To only include certain outputs into the preset, the user will select SAVE SELECTED, then choose the outputs (using the output buttons) that are to be included in the preset. If the output is not split, the user will have the option of selecting VIDEO, AUDIO or both by pressing the VIDEO and AUDIO buttons.. The following screen will be displayed to allow the user to confirm that the settings are correct and to select video and/or audio.
If the settings are correct the user will press SELECT and this output will be saved locally until the ESCAPE button is pressed. When finished selecting outputs the user will press ESCAPE and is prompted to save the preset. If the user presses SELECT at the YES prompt, the preset will be saved to the main unit.
SELECT
SELECTED PRESET 01
OUTPUT NUMBER
CHOOSE OUTPUT NUMBER
THENVID/AUD
THEN 'SELECT' SAVES
OUTPUT TO PRESET
ESCAPE
30 | MatrixPRO- II |