Apple 310 manual Setdefaulttimeouts, Setidlefonts, Setpassword

C H A P T E R 2

LaserWriter Select 310 Software

setdefaulttimeouts

Syntax job manualfeed wait setdefaultimeouts –

Definition This operator establishes the default values for the three timeouts. It returns the following:

■system parameter jobtimeout for job

■system parameter waittimeout for wait

■manualfeedtimeout for manualfeed

Errors invalidaccess, rangecheck, stackunderflow, typecheck

setidlefonts

Syntax	mark font sxsy rot nchars ... setidlefonts –
Definition	This operator expects the operand stack to contain up to 150 integers in
	the range 0 through 255. The integers are delimited by a mark
	immediately below them. Operator setidlefonts removes the mark
	and the integers and remembers them permanently. The integers are
	interpreted in groups of five that specify characters that are to be scan
	converted while the LaserWriter Select 310 printer is idle. If the last set of
	integers in the list is not a multiple of five at idle time, that group is
	ignored. An empty list of integers, that is one with just a mark on top of
	the operand stack, specifies that the standard set of characters is to be
	scan converted.
Errors	invalidaccess, limitcheck, rangecheck, typecheck,
	unmatchedmark

setpassword

Syntax old new setpassword bool

Definition This operator sets the system administrator password, controlling the ability to escape from the server save/restore context and to make persistent changes to system parameters or to the VM (virtual memory). The operator requires two integer operands: the old password and the new password. If old is the correct old password, setpassword changes the password to new and returns true. Otherwise, after a delay of one second, it returns false.

Standard value: 0

Error typecheck

Setting Compatibility Operators 25