Brady 2200 user manual Installing a Ribbon Cartridge, Installing a Label Roll

Page 11

Installing a Ribbon Cartridge

Install a ribbon cartridge as shown below:

Ribbon

Avoid touching or wrinkling.

Take-up Spool Remove any ribbon slack by rotating spool end towards you (↓).

1.Ribbon Cartridge Slide firmly into printer. (Locking Lever must be in unlock position - see below)

2.Locking Lever (Underneath the printer) Push the lever towards the back of the printer to close print head and lock ribbon cartridge in place. Pull the lever towards the front of the printer to open the print head and release the installed cartridge.

Installing a Label Roll

Use the following instructions to install a label roll into your printer (follow steps 1-8 in order).

7.Guide Slot

Feed the leading edge of the label roll through the black plastic guide slots until you meet resistance.

8.<Feed> Key Press to feed labels through the print head.

2.Power Switch Turn the printer ON.

5.Make sure labels unroll from the top and label roll is firmly snapped into cradle.

6.Press <Enter> to clear message on display: “ERROR No Label Present”

3. Roll Door Open by lifting at the edges.

4. Guide Plate Lever Press down and slide the lever to match the width of the label roll.

1.Ribbon Cartridge Make sure cartridge is installed and lever is locked.

10

Image 11

Contents S 2 2 0 0ª FCC Notice- U.S. Only Brady WarrantyLicense Agreement Copyright Technical Support Table of Contents Packaging to Save Future Shipment of the Battery PackIntroduction Unpacking Your TLS2200 PrinterCertification TLS2200 Printer SpecificationsPhysical and Environmental Characteristics Quick Label Making Instructions Disposal of the Battery Pack Setting UpUsing the Battery Pack and Charger Installing a Label Roll Installing a Ribbon CartridgeReading the LCD and Moving the Cursor Typing and Editing TextStatus Bar Typing Text CharactersLabel line Cursor and Editing Keys =16Space Bar Text Editor Use of the Enter Key When Composing a LegendDefault Font Size Changing the Font Size TLS2200 Printer FontsText Editing Notes BradySaving and Recalling a Legend Function KeysPrinter Setup MenuSetup Menu Options Style BarcodeSerial Setup Menu Units Adjusting Burn TemperatureSetting Peel Time Printing Your LabelsSerialization Advanced FeaturesReloading Label Rolls and Ribbons General Guidlines for Serializing Creating Bar Code Labels Setting the Center-to-Center SpacingSetting Bar Code Options Creating Terminal Block LabelsMaximum Bar Code Characters Code 39 Bar Code SymbologyTLS2200 System Bar Code Parameters Page Creating a One-Line Legend, Component Marker Tutorial GuideCreating a Wiremarker Text A101 6BRADY Replacing the System Power Cell MaintenanceCleaning the Drive Roller and Cutter Cleaning the Print HeadDescription Accessory Parts ListIdentification Solutions & Specialty Tapes