Brady 2200 user manual Function Keys, Saving and Recalling a Legend

Page 19

will encounter the message “Reduce Type Size” when you attempt to print the label. You will have to scroll to the line where the switch was made, reduce the size of the font (if text) or bar height (if a bar code) and print again.

Saving and Recalling a Legend

Once you have finished entering and editing your text, you may wish to save your legend for retrieval at some later point in time. The TLS2200 System allows you to save a legend by simply pressing the <Func> + <Save> keys.

Once saved, a legend can be recalled to the text editor screen by pressing <Func> + <Recall>. Any legend currently displayed on the text editor screen will be overwritten by the recalled legend. Once recalled, the saved legend will continue to be stored in the printer’s memory.

The TLS2200 System can <Save> and <Recall> one legend in memory. If you have a previously saved legend stored in your printer, then save a new legend, the new legend will overwrite and replace the previously saved legend.

NOTE: The Font Size(s) and Legend Type(s) are saved with the legend. If you change to a smaller label part and attempt to recall a legend saved with a font size or bar code height larger than the maximum supported for the label part, the legend will not be recalled to the display.

Function Keys

The use of each function key is described in the chart below:

Feed

Advances to the next label.

Print

Prints the legend.

Multi Print

Prints multiple copies of the legend (1-100).

Serial

Serializes legend starting with the character at the cursor.

Exit

Exits you back to the text editor screen from any Serial, Multi Print or

 

Setup Menu screen.

Peel

Advances label to peel position.

 

NOTE: Cannot use function with PSPT label rolls (PermaSleeve).

Type

Toggles Legend Type status (Text, Bar Code)

Shift + >

Increases font size

Shift + ?

Decreases font size

Shift + 0 (zero)

Toggles Label Format (Component, Wire)

Setup

Displays Setup menu options

Save

Saves the currently displayed legend

Recall

Recalls the previously saved legend.

List

RESERVED FOR FUTURE USE

 

18

Image 19
Contents S 2 2 0 0ª FCC Notice- U.S. Only Brady WarrantyLicense Agreement Copyright Technical Support Table of Contents Packaging to Save Future Shipment of the Battery PackIntroduction Unpacking Your TLS2200 PrinterPhysical and Environmental Characteristics TLS2200 Printer SpecificationsCertification Quick Label Making Instructions Using the Battery Pack and Charger Setting UpDisposal of the Battery Pack Installing a Label Roll Installing a Ribbon CartridgeReading the LCD and Moving the Cursor Typing and Editing TextStatus Bar Typing Text CharactersLabel line Cursor and Editing Keys =16Space Bar Default Font Size Use of the Enter Key When Composing a LegendText Editor Changing the Font Size TLS2200 Printer FontsText Editing Notes BradySaving and Recalling a Legend Function KeysSetup Menu Options Setup MenuPrinter Style BarcodeSerial Setup Menu Units Adjusting Burn TemperatureSetting Peel Time Printing Your LabelsReloading Label Rolls and Ribbons Advanced FeaturesSerialization General Guidlines for Serializing Creating Bar Code Labels Setting the Center-to-Center SpacingSetting Bar Code Options Creating Terminal Block LabelsTLS2200 System Bar Code Parameters Code 39 Bar Code SymbologyMaximum Bar Code Characters Page Creating a One-Line Legend, Component Marker Tutorial GuideCreating a Wiremarker Text A101 6BRADY Replacing the System Power Cell MaintenanceCleaning the Drive Roller and Cutter Cleaning the Print HeadDescription Accessory Parts ListIdentification Solutions & Specialty Tapes