Safety and the environment
2.2Safety notes
•The transfer printer is designed for power supply systems from 100 V AC to 240 V AC. Connect the transfer printer only to electrical outlets with a ground contact.
•Couple the transfer printer to devices using extra low voltage only.
•Before making or undoing connections, switch off all devices involved (computer, printer, accesso- ries etc.).
•Operate the transfer printer in a dry environment only and do not get it wet (sprayed water, mist etc.).
•If the transfer printer is operated with the cover open, ensure that clothing, hair, jewelry and similar personal items do not contact the exposed rotating parts.
•The print mechanism can become hot during printing. Do not touch it during operation and allow it to cool down before changing the media or before removal or adjustment.
•Carry out only the actions described in these operating instructions. Other tasks may only be per- formed by trained personnel or service technicians.
DANGER!
Risk of death via mains voltage!
⇒Do not open the housing of the transfer printer.
2.3Environmentally-friendly disposal
Used devices contain valuable recyclable materials which should be utilized.
⇒ Dispose of used devices separately from other waste, i.e. via an appropriate collection site.
The modular nature of the transfer printer allows it to easily be disassembled into its component parts so that the parts can be turned in for recycling.
The PCB of the transfer printer has a lithium battery.
⇒Dispose of this battery in a collection container for old batteries at the store or with the public waste disposal authority.
4 | Quick Operator’s Guide | Edition 7/06 |