Installation
3.3Connecting the transfer printer
| 1 | Power switch |
| 2 | Power connection jack |
1 | 3 | Slot for Cardbus or a Type II PC card |
4 | Slot for a CompactFlash memory card | |
2 | 5 | Ethernet 10/100 |
3 | 6 | USB port for a keyboard or scanner |
7 | USB | |
| 8 | Serial RS 232 C port |
4 |
|
|
5
6
7
8
Fig. 2: Power and computer connec- tions
3.3.1Connecting to the power supply
The printer is equipped with a versatile power supply unit. The device may be operated with a mains voltage of 230 V AC/ 50 Hz or 115 V AC/60 Hz without any adjustments or modifications.
CAUTION!
The device can be damaged by undefined
⇒Set the power switch (1) to "O" before plugging in the device.
1.Insert power cable into power connection jack (2).
2.Insert plug of the power cable into a grounded electrical outlet.
3.3.2Connecting to a computer or computer network
Insufficient or missing grounding can cause faults during operation.
Ensure that all computers and connection cables connected to the transfer printer are grounded.
⇒Connect transfer printer to computer or network with a suitable cable.
Details on the configuration of the individual interfaces are found in the “Configuration Instructions“.
3.4Switching the transfer printer on and off
Once all connections have been made:
⇒Switch printer on via the power switch (1).
The printer runs through a system test and then indicates the system status Ready in the display. If an error has occurred while the system was starting up, the 
symbol and the error type are displayed.
6 | Quick Operator’s Guide | Edition 7/06 |