Brady BP-PR PLUS Series manual Device types, Standard device, Peel-off device version

Page 9

BP-PR PLUS series

Device types

5 Device types

5.1Standard device

The standard device is used for printing labels or continuous media on rolls or fanfolded media. In Tear-Off mode, labels are removed by hand.

The labels can be cut off automatically with the 'cutter' accessory. For details, see the Operating Instruc- tions for the 'cutter' accessory.

The labels can be wound up with the 'external rewinder' accessory. For details, see the Operating Instructions for the 'external rewinder' accessory.

Because there is no internal rewinder, automatic peeling off of the labels from the carrier medium (Peel- Off mode) and internal rewinding are not possible.

5.2Peel-off device version

The peel-off device version is capable of Peel-Off mode and thus has an internal rewinder and a pulling system comprised of a rewind assist roller and a locking system. Printing on labels or continuous media from rolls or fanfolded media is possible.

Operation in Tear-Off mode and with the 'cutter' or 'external rewinder' accessory is possible by installing the tear-off plate (see ”6.4” on page 17), as with the standard device.

In Peel-Off mode, the label is peeled off the liner after printing. The label can be removed by hand with the peel-off sensor (accessory). Label removal can also occur automatically via the applicator (acces- sory). The liner is rolled up via the internal rewinder.

For use in Internal Rewind mode remove the locking system (see ”6.5” on page 18) and replace the dispense plate with a rewind guide plate (see ”6.4” on page 17).

Edition 7/06

Quick Operator’s Guide

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Transfer Printer BP-PR Plus series Approval Intended use Safety and the environmentSafety notes Safety and the environmentEnvironmentally-friendly disposal Setting up the transfer printer InstallationInstallation Unpacking the transfer printerSwitching the transfer printer on and off Connecting the transfer printerConnecting to the power supply Connecting to a computer or computer networkOperating panel Symbol indicatorsLayout of the operating panel Functions of the operating panel during printingButton functions Power-Save modeStandard device Device typesPeel-off device version Device typesRemoving and installing the core adapter Loading mediaLoading labels from a roll Inserting a label strip into the printhead Positioning the label roll on the roll retainerSetting the label sensor Winding up the label strip in Rewind mode Winding up the liner in Peel-Off mode Setting the head locking system Loading transfer ribbon Setting the feed path of the transfer ribbon Installing a plateRemoving a plate Removing and installing the locking system Installing the locking systemRemoving the locking system Peel-Off mode Tear-Off modePrinting SynchronizationGeneral cleaning Cleaning and basic maintenanceCleaning the print roller Cleaning the printheadCleaning the label sensor EC Declaration of Conformity EC Declaration of Conformity
Top Page Image Contents