Siemens MC35 manual Atsstr Remote-SAT Response Get Input

Remote-SAT User's Guide

1.5.2.11 AT^SSTR Remote-SAT Response – Get Input (35)

Write command

AT^SSTR=35, <status>, , <inputString>

Reference

Siemens

The TA sends a response that can indicate the user's intentions and include the input string.

Response

OK

Parameters

<cmdType> 35 – Proactive command ID, see Table 1 <status> Unsigned Integer, range 0-255

0 Command performed successfully

16Proactive SIM session terminated by user

17Backward move in the proactive SIM session requested by the user

18No response from user

19Help information required by the user

32	TA currently unable to process command
132	TA currently unable to process command because
	screen is busy.
<inputString>	User response entered as a string, length depends on values
	of <responseMin> and <responseMax> returned by the
	related AT^SSTGI command.

Coding of any input character is related to the selected alphabet:

•Input of a character in case of ANSI character set requests one byte , e.g. “Y”.

•Input of a characters in UCS2 alphabet requests a 4 byte string, e.g. “0059” is coding the same character “Y”.

•Coding of an empty string is done as “\1b” in every alphabet.

Note

The alphabet – and therefore the set of allowed characters - is specified by the ME in the response to the related AT^SSTGI. However, do not mix up this alphabet with the one selected for the alphabet format on the transmission line on SAT activation, i.e. second parameter of AT^SSTA).

MC35_SAT_01_v02.00 Page 52 of 65 11.01.2002