Siemens MC35 manual Atsstgi Remote-SAT Get Information Setup Call, ATSSTGI=16

Page 26

Remote-SAT User's Guide

1.4.4 AT^SSTGI Remote-SAT Get Information – Setup Call (16)

Write command

AT^SSTGI=16

This command is to be used upon receiving an unsolicited result code ^SSTN:16.

If the SIM Application attempts to set up a call it uses this response to inform the TA of the call parameters.

The sequence of events is as follows:

1.After the Remote-SAT notification 16 was issued the TA has to ask for the command parameter via AT^SSTGI=16.

2.If the SIM Application supplies no confirmation text or icon parameter, the TA gives other information to the user, e.g. the telephone number. In this case flow continues at step 4.

3.If the SIM Application supplies a non empty confirmation text or icon parameter, the TA uses only these to ask the user whether or not he wishes to set up the call.

4.If the user confirms to set up the call, AT^SSTR=16,0 shall be responded.

5.If the user denies to set up the call, AT^SSTR=16,34 shall be responded.

6.After confirmation phase the TA may present a dialling animation on the screen until a mandatory parameter line

^SSTR: 16, <TermQualifier>, <TerminationCauseText> is issued.

7.If <TermQualifier> is not equal to 0 the dialling process did not perform successfully.

If <TerminationCauseText> is not an empty string, this text has to be shown to the user for an appropriate time, e.g. 2 seconds. The text contains information regarding the dial termination cause, e.g. call barring through Call Control by SIM mechanism.

<TerminationCauseText> is an empty string, the TA shall give an own indication to the user.

8.If <TermQualifier> is equal to 0, the dial process has been successfully finished:

If <TerminationCauseText> is not an empty string, this text shall be used to inform the user during the call setup.

If <TerminationCauseText> is an empty string, <callSetupText> and/or <confirmationIconId> shall be used to inform the user during call setup. However, if <callSetupText> contains no data, too, no indication shall be shown.

9.The TA shall give the user an opportunity to end an ongoing call, set up by the Proactive Command. In this case the TA shall issue an ATH command to the ME.

Response

^SSTGI: <cmdType>, <commandDetails>, <confirmationText>, <calledNumber>, <callSetupText>, <confirmationIconQualifier>, <confirmationIconId>, <callSetupIconQualifier>,<callSetupIconId> <CR> <LF>

Parameters

 

<cmdType>

16 – Proactive command ID, see Table 1

<commandDetails>

This byte is RFU.

<confirmationText>

String for user confirmation stage

<calledNumber>

String containing called number

<callSetupText>

String for call setup stage

<confirmationIconQualifier> Unsigned Integer, range 0 – 255, used as a bitfield.

bit 1: 0 = icon is self explanatory and replaces text

MC35_SAT_01_v02.00

Page 26 of 65

11.01.2002

Page 25 Page 27
Image 26
Page 25 Page 27
Contents MC35 Module MC35 Terminal Remote-SAT Users Guide Contents Version History AtsstrAT Commands for Remote-SAT in MC35 IntroductionSupported product versions and related documents Related documentsSAT Context Diagram SATCommand Type Values Usage of Remote-SATCommand Name Parameter Types States of Remote-SATRemote-SAT State Transition Diagram Reset OFFRemote-SAT State Transition Table Examples Using Remote-SAT Atssta? Ssta 1,1,1,7FFFFFFF7F0100DF1FSSTN36 Sequence scenarios Initialisation sequenceProactive Command sequence Envelope Command sequence Menu Selection Envelope Command sequence Call / MO / SMS Control Event Download sequence ATSSTA? Atssta Remote-SAT ActivationATSSTA=? ATSSTA=UCS2 Sstn Remote-SAT Notification ATSSTGI=? Atsstgi Remote-SAT Get InformationAtsstgi Remote-SAT Get Information Generic Format ATSSTGI?Atsstgi Remote-SAT Get Information Refresh ATSSTGI=1RFU Atsstgi Remote-SAT Get Information Set Up Event ListATSSTGI=5 Atsstgi Remote-SAT Get Information Setup Call ATSSTGI=16Reference Siemens Atsstgi Remote-SAT Get Information Send SS ATSSTGI=17= RFU Atsstgi Remote-SAT Get Information Send UssdATSSTGI=18 Atsstgi Remote-SAT Get Information Send Short Message ATSSTGI=19Atsstgi Remote-SAT Get Information Send Dtmf ATSSTGI=20Atsstgi Remote-SAT Get Information Play Tone ATSSTGI=32Atsstgi Remote-SAT Get Information Display Text ATSSTGI=33Atsstgi Remote-SAT Get Information Get Inkey ATSSTGI=34Atsstgi Remote-SAT Get Information Get Input ATSSTGI=35Atsstgi Remote-SAT Get Information Select Item ATSSTGI=36Siemens MC35SAT01v02.00 11.01.2002 Atsstgi Remote-SAT Get Information Setup Menu ATSSTGI=37Atsstgi Remote-SAT Get Information Setup Idle Mode Text ATSSTGI=40ATSSTR? Atsstr Remote-SAT Response Generic FormatATSSTR=? ATSSTR=Siemens Remote-SAT Command Status ValueATSSTR=1 Proactive Commands Atsstr Remote-SAT Response RefreshAtsstr Remote-SAT Response Set Up Event List ATSSTR=5Atsstr Remote-SAT Response Setup Call ATSSTR=16Atsstr Remote-SAT Response Send SS ATSSTR=17Atsstr Remote-SAT Response Send Ussd ATSSTR=18Atsstr Remote-SAT Response Send Short Message ATSSTR=19Atsstr Remote-SAT Response Send Dtmf ATSSTR=20Atsstr Remote-SAT Response Play Tone ATSSTR=32Atsstr Remote-SAT Response Display Text ATSSTR=33Atsstr Remote-SAT Response Get Inkey Atsstr Remote-SAT Response Get Input Atsstr Remote-SAT Response Select Item ATSSTR=36Atsstr Remote-SAT Response Set Up Menu ATSSTR=37Atsstr Remote-SAT Response Set Up Idle Mode Text ATSSTR=40Atsstr Remote-SAT Event Response User Activity Event Response CommandsAtsstr Remote-SAT Event Response Menu Selection ATSSTR=232Atsstr Remote-SAT Event Response Language Selection Atsstr Remote-SAT Event Response Terminate CommandAtsstr Remote-SAT Event Response Idle Screen Available ATSSTR=233Appendix Appendix a SAT ProfileRemote-SAT Users Guide Sustained Display Text Send Dtmf command Appendix B UCS2 Character Set Options UCS Character Set RowsRemote-SAT Users Guide Zone open zone Appendix C Language Codes Language ISO Code Win Code Mac Name Mac CodeMC35SAT01v02.00 MC35SAT01v02.00
Related manuals
Manual 238 pages 40.72 Kb

MC35 specifications

The Siemens MC35 is a compact and versatile modem designed primarily for mobile communication, data transmission, and machine-to-machine (M2M) applications. Launched in the early 2000s, it quickly became popular due to its blend of performance, reliability, and ease of integration, making it a solid choice for developers and businesses.

One of the key features of the MC35 is its support for GSM and GPRS technologies. This allows it to connect seamlessly to various networks, enabling users to transmit data at speeds that were impressive for its time. The GPRS capability can offer data rates of up to 171.2 kbps, allowing for efficient data transfer even in areas with limited connectivity.

The MC35 is designed to support both SMS and voice functionalities, making it adaptable for a range of applications. This includes remote monitoring, telemetry, and alarm signaling. The ability to send and receive SMS messages is a significant advantage for applications that require immediate alerts and notifications, enhancing its utility in security systems and industrial automation.

Furthermore, the modem is equipped with a range of interfaces, including serial communication (RS232), which makes it compatible with various hardware devices. This facilitates easy integration into existing systems, whether for industrial machinery or consumer electronics. Additionally, it features a robust software development kit (SDK), which enables developers to create custom applications tailored to their specific requirements.

Power consumption is another notable characteristic of the Siemens MC35. It is engineered to be energy-efficient, which is especially important for battery-operated devices or systems that require a prolonged operation without frequent recharging or maintenance.

In terms of physical characteristics, the MC35 is compact and lightweight, allowing it to fit into various enclosure designs without occupying much space. Its durability ensures it can perform reliably in different environments, making it suitable for outdoor and industrial applications.

To summarize, the Siemens MC35 stands out as a reliable modem with a rich feature set that includes GSM and GPRS support, SMS and voice capabilities, easy integration through various interface options, and energy-efficient operation. Its adaptability makes it a valuable tool for a wide array of communication and data transmission tasks, solidifying its place in the evolution of mobile communications technology.
Top Page Image Contents