1. Printer Setup
This chapter contains important information on setting up your printer. Be sure to read this chapter carefully before using the printer for the first time.
Choosing a place for the printer
Before unpacking the printer from the box, plan the installation location of your printer. Consider the following points.
✓Choose a firm, level surface where the printer will not be exposed to vibr ation.
✓The power outlet you plan to connect to for power should be nearby and unobstructed.
✓Make sure that the printer is close enough to your computer for you to connect the two with your printer cable.
✓Allow six inches (15 centimeters) of free space on either side and in the back of the printer.
✓Make sure that the printer is not exposed to direct sunlight.
✓Make sure that the printer is well away from heaters.
✓Make sure that the surrounding area is clean, dry, and free of dust.
✓Make sure that the printer is connected to a reliable power outlet. It should not be on the same electric circuit as copiers, refrigerators, or other appliances that cause power spikes.
✓Use a power outlet that matches the power rating noted on the label affixed to the bottom of your printer.
✓Make sure that the room where you are using the printer is not too humid.
– 1 –
