Star Micronics LC-500 user manual Loading cut-sheet paper

Loading cut-sheet paper

This section describes the procedure for loading cut-sheet paper. You can also use fanfold paper. For details on using fanfold paper, see “Loading fanfold paper” on page 18. If the fanfold paper is currently loaded, first park the fanfold paper using the procedures described in “Parking fanfold paper” on page 23.

1. Set the release lever to the cut-sheet position.

2.Set the adjustment lever to the value that matches the thickness of the paper you are using. The setting for normal paper is 1. Set the lever to a larger value for thicker paper, or to a smaller value for thinner paper.

5

4

3

2

1

5 4 3 2 1

Adjustment lever

– 14 –