Star Micronics LC-500 user manual EDS-2

< EDS-2>

BANK SW		FUNCTION		ON		OFF
A	1	Input buffer	Large ( 54.5 K bytes ) *			Small ( 1K byte )
	2	Auto CR with LF	Enabled *			Disabled
	3	Auto LF with CR	Disabled *			Enabled
	4	Buzzer	Enabled *			Disabled
	5	Saving Control Panel Status	Panel Macro *			Auto Saving
	6	Quiet mode	Disabled *			Enabled
B	1	Auto Tear-off	Disabled *			Enabled
	2	Multi-part mode
				2	3
	3
				ON	ON	Auto selection *
				ON	OFF	Multi-part mode
				OFF	ON	Normal mode
	4	Waiting period for
				4	5
	5	Paper loading
				ON	ON	0.5 sec.
				ON	OFF	1.0 sec.
				OFF	ON	1.5 sec.
				OFF	OFF	2.0 sec.
	6	75% Compress mode	Disabled *			Enabled
C	1	Line spacing	1/6" *			1/8"
	2	FF command	Eject *			Form Feed
	3	Eject direction	Front *			Rear
	4	Eject paper at Power ON	Enabled *			Disabled
	5	Skip over perforation	Disabled *			Enabled
	6	Paper out detector	Enabled *			Disabled
D	1	Print direction	Bi-directional *			Uni-directional
	2	Print direction command	Disabled *			Enabled
	3	CR centering at top of form	Disabled *			Enabled
	4	CR wiping at top/bottom	Disabled *			Enabled
	5	2-pass printing at top/bottom	Disabled *			Enabled
	6	Strobe timing	Normal *			Special
	7	ACK timing	Normal *			Special

*: Default setting

– 34 –