Q-See QR404 user manual Record Setup

QR404 User Manual

Please note that any modifications you make through the Camera Setup interface will not be applied until you click the [APPLY] button at the bottom of the dialog box (Picture 5). Once you do this, you will then be prompted to save your settings, and you must click [OK] in order for the changes to take effect. If you wish to abort the changes you made, simply click the [Exit] button on the bottom of your dialog box (Picture 5). By clicking on the [DEFAULT] button at the bottom of your Color Setup dialog box (Picture 5) all system default values will be reset to their original factory installed settings.

(Picture 5B)

5.2.2: Record Setup

(Picture 6)

(Picture 6A)

The right click menu in the Main Interface mode (Picture 3) allows you to access the Main Menu interface (Picture 4). To set up the recording parameters and settings of your DVR, go to [Main Menu] [Record] to enter into the [Record Setup] menu (Picture 6).

The [Record Setup] menu (Picture 6) allows you to turn the recording status for each camera channel on and off, set the recorded image quality and enable audio recording. This menu also allows you to schedule your recording times and set your recording file sizes through the quality setting.

The [RECORD] button on your Record Setup Menu (Picture 6) allows you to turn each camera channel’s recording ability on or off. The [QUALITY] button gives you the option of choosing the quality of your recorded images from a drop down list for each individual camera channel. The [AUDIO] button allows you to turn the audio input on or off. When the audio is turned off, the DVR system will not record audio and you will not hear sound during playback of your recorded events.

The [REC MODE] drop down list allows you to setup the system to record 24 hours a day, on a set schedule or when motion is detected. The [FILE SIZE] drop-down list allows you to set the maximum recording time for all recorded files to be 15, 30, 45 or 60 minutes.

TIME SCHEDULED RECORDING: To set your system up to record on a time schedule, choose the TIME SCHEDULE RECORD option on the REC MODE drop down list. To record 24 hours a day, choose the ALWAYS option from the REC MODE drop down list. To record on motion or a set schedule, select Time Schedule Record and click the “Schedule” option. Choosing this option will initiate a pop-up SCHEDULE interface which will allow you to customize your scheduling options as illustrated by Picture 6A. You can choose from a pull down menu at the top

10