Siemens SS2604 manual System, Printer

		Operation and Status
		questing the Internet connection.
	•	Destination - The Internet address which was requested. If
		the URL Filter is enabled, this address will be shown as a
		URL. Otherwise, the IP address will be displayed.
	•	Blocked - If the request was blocked by the URL Filter
		function, this will display "Yes". Otherwise, it will be blank.
"Connection Details"	Click this button to open a sub-window and view a detailed
Button	description of the current connection. Depending on the type of
	connection, a "log" may also be available.
LAN
IP Address	The IP Address of the DSL/Cable Router.
Network Mask	The Network Mask (Subnet Mask) for the IP Address above.
DHCP Server	This shows the status of the DHCP Server function - either "En-
	abled" or "Disabled".
	For additional information about the PCs on your LAN, and the IP
	addresses allocated to them, use the Network Clients option on the
	Advanced menu.
System
Device Name	This displays the current name of the DSL/Cable Router.
Firmware Version	The current version of the firmware installed in the DSL/Cable
	Router.
"System Data"	Clicking this button will open a Window which lists all system
Button	details and settings.
Printer
Printer Status	This indicates the current status of the printer. Possible values are:
	•	Idle
	•	Printing
	•	Off-line
	•	Out of paper
"Abort Current Print	Click this button to terminate the current print job. This button
Job" Button	should be used if the current print job is not printing correctly.
Buttons
Connection Details	View the details of the current Internet connection. The sub-
	screen displayed will depend on the connection method used. See
	the following sections for details of each sub-screen.
Access Log	View details of outgoing connections to the internet.
System Data	Display all system information in a sub-window.
Abort Current	Use this to terminate the current print job if is not printing cor-
Print Job	rectly.
Refresh Screen	Update the data displayed on screen.

39