Siemens SS2604 manual Printer Port, Logical Printers

Advanced Configuration

Printer Port

Printer Port configuration is only required if using LPD printing under Linux or Unix. Other- wise, these settings are ignored.

Under LPD, the DSL/Cable Router supports 3 "Logical Printers".

	Figure 41: Printer Port Screen
Logical Printers
No (L1, L2, L3)	There are 3 Logical Printers (Ports), named L1, L2, and L3.
	These names can not be changed, and must be used when select-
	ing the logical printer from your Unix system.
Pre-string (HEX)	Enter (in HEX) the series of printer commands to be sent to the
	attached printer BEFORE each print job.
Post-string (HEX)	Enter (in HEX) the series of printer commands to be sent to the
	attached printer AFTER each print job.
LF to CR/LF	If checked, Unix-style LF (line feed) characters at the end of each
	line will be converted to CR/LF (carriage return/line feed) pairs,
	as used in MSDOS and Windows.

69