6500 Series Residential Gateway User’s GuideIntroduction
Rear Panel
DSL Port | Connect the RJ11 DSL cable (looks like a telephone |
|
(RJ11) | cord) here to use your DSL connection through an |
|
| existing phone line. |
|
USB Port | If your Gateway has a USB port, connect the USB |
|
| cable here. The USB driver software must be | Example Rear Panel |
| installed from the provided | |
10/100 Ethernet | Connect the RJ45 Ethernet cable here to connect |
|
Ports 1 - 4 | your computers, hubs, or switches to the Gateway. |
|
| If your model has four ports, you can configure port |
|
| #4 as either a LAN or WAN port. |
|
Power Adapter | Connect the supplied power adapter provided with |
|
Port | the Gateway here. |
|
Power Button | Push this button to power the Gateway on and off. |
|
General Safety Guidelines
When using the SpeedStream Gateway, observe the following safety guidelines:
•Never install telephone wiring during a storm.
•Avoid using a telephone during an electrical storm. Lightening increases the risk of electrical shock.
•Do not install telephone jacks in wet locations and never use the product near water.
•Do not exceed the maximum power load ratings for the product; otherwise, you risk dangerous overloading of the power circuit.
5