Siemens 6500 Series manual Enables powerline filtering

Page 61

6500 Series Residential Gateway User’s Guide

Configuring Advanced Features

5.Select one of the following Powerline Filter options:

Enable

Enables powerline filtering.

Disable

Disables powerline filtering. If powerline filtering is disabled, all devices have access to the Gateway.

6.If powerline filtering is enabled, select one of the following Filter Mode options:

Allow

Permits access to all the MAC addresses entered in the table.

Deny

Restricts access to all the MAC addresses entered in the table.

7.Type the MAC address in the MAC Address column next to each device you either want to permit or restrict access.

8.Click Next. This displays the “Powerline Remote Configuration” window.

Optionally configure a network password remotely on other powerline devices. To do this:

9.Enter the password you want to assign to all powerline devices in Powerline Network Password.

10.Enter the current password in Device Password for the powerline devices you want to change.

11.Click Next. This displays the Wizard “Finish” window.

12.Click Reboot to save the settings.

56

Image 61
Contents SpeedStream→ Residential Gateway User’s Guide Limitations Contents Series Residential Gateway User’s Guide Contents Network LAN Features Features of the Residential GatewaySecurity Features IntroductionAdvanced Gateway Functions Configuration & ManagementMinimum System Requirements Package ContentsFront Panel LEDs Physical DetailsRear Panel General Safety GuidelinesHardware Installation InstallationBasic Installation Procedure In-Line Filter Installing Line FiltersWall-Mount Filter Connect the power Connecting CablesConnect the Ethernet cables Connect the DSL cableInstall USB Driver Software USB Installation Method Microsoft WindowsUSB Driver Installation Macintosh Systems Connect the USB CableCheck TCP/IP Protocol Settings Operating System ConfigurationChecking TCP/IP Settings Windows 9x/ME Checking TCP/IP Settings Windows Checking TCP/IP Settings Windows XP Ethernet Adaptor en0,en1,… if connecting via USB Checking TCP/IP Settings MAC OS 8.6 throughChecking TCP/IP Settings MAC OSX Click Setup. This starts the New Connection Wizard Internet Access ConfigurationFor Windows 9x/2000 For Windows XPBefore Configuring the Gateway SpeedStream Gateway SetupTo do this Refer to Using your Web Browser Connecting to the GatewayGateway Setup Wizard Page WEP 64-bits Disable SecurityWEP 128-bits Enable DisableSurf Now ContinueOpen System Wireless Setup WEP 64-Bit OptionShared Key Wireless Setup WEP 128-Bit Option Tkip Wireless Setup WPA PSK OptionMenu Bar Home WindowLogging into the Gateway ToolbarLogging out of the Gateway Configuring Users Configuring Users and DevicesAdding a User Disable all Content Filtering Gamer AdministratorWeb Surfer Infinite Time Only allowed fromMinutes Page Editing a User Profile Click Delete User Deleting a UserViewing User Logs Configuring Devices Gateway Options discussed in this chapter Configuring Advanced FeaturesISP Connection Configure the ATM Virtual Circuit Advanced ISP SettingsATM Virtual Circuits Static Routes Dynamic DNS To set up Dynamic DNS on the GatewayRIP Routing Information Protocol LAN/WAN Port Home NetworkIP Network Server Ports LAN/WAN Port Select Enable to enable the Wireless Interface Wireless NetworkWPA PSK Wireless Setup WEP 64-Bit Option Advanced Home Network Wireless Setup WEP 128-Bit Option Advanced Home Network Wireless Setup WPA PSK Option Advanced Home Network Allow Wireless Filter and Options ConfigurationDeny RTS/CTS Threshold Data Transfer RateFragmentation Threshold Minimum Powerline Security ConfigurationStandard MaximumEnables powerline filtering Select Universal Plug and Play UPnP Universal Plug and PlayEnable Discovery and Advertisement only Ssdp Disable UPnPEnable full Internet Gateway Device IGD support Enable Access LoggingSecurity Level Firewall SettingsAttack Detection IP FilteringLow Security LevelHigh CustomAttack Detection Fragmented TCP Header Fragmented TCP PacketFragmented UDP Header Fragmented Icmp HeaderIP Filtering This IP Address Any IP AddressAny IP Address TCP/UDP Options Window Icmp Options Window Clone IP Filter Rules Enable DMZ with this Host IP address Disable DMZMake Settings Permanent Make Settings Last forEnable Snooze, and set the Snooze time interval to Disable SnoozeReset the Snooze time interval to Firewall Snooze ControlClick Save Settings Administrator PasswordPort By-Pass Napt Address TranslationAddress Translation With NAT Address Translation With Napt Redirect selected protocol/service to IP Address Redirect selected protocol/service to this router− Telnet − DomainGateway Health options discussed in this chapter Monitoring Gateway HealthInternet Stats StatisticsHome Networking Stats Security StatsATM Statistics Internet StatsDSL Statistics Wireless Statistics Powerline StatisticsHome Networking Stats Ethernet StatisticsLogging User AccessSystem Logging Firewall LoggingRemote Update FirmwareLocal Diagnostics Customize Miscellaneous Gateway OptionsCustomization options discussed in this chapter Color Palette Language Time Zone Select Yes for Enable Time ClientReboot General Issues TroubleshootingInternet Access Problem Cant connect to the Gateway to configure itTelephone Contacting Technical SupportFax InternetSpecifications OAM F5 Routing Bridging AAL and ATM Support Power CertificationsSiemens Subscriber Network