6500 Series Residential Gateway User’s Guide | Configuring Advanced Features |
9.If you selected This IP Address, enter an IP address in the IP Address field and do one of the following:
•Enter a netmask in the Netmask field.
•Select or Host to use your Gateway netmask as the source netmask.
10.Under the Destination heading, select a network connection from the Network Interface
11.Select one of the following options:
•Any IP Address
Select this option if this rule applies to any IP address of the destination.
•This IP Address
Select this option if a rule applies to a specific IP address of the destination.
12.If you selected This IP Address, enter an IP address in the IP Address field and do one of the following:
•Enter a netmask in the Netmask field.
•Select or Host to use your Gateway netmask as the destination netmask.
13.Click Next. This displays the “Protocol Definition” window.
14.Do one of the following:
•Select one of the following protocol options from the Select by Name
−Any Protocol
−TCP (Transmission Control Protocol):
Provides reliable, sequenced, and unduplicated delivery of bytes to remote or local users. Click Next to display the “TCP/UDP Options” window.
−UDP (User Datagram Protocol):
Provides for the exchange of datagrams without acknowledgement or guaranteed delivery. Click Next to display the “TCP/UDP Options” window.
−ICMP (Internet Control Message Protocol):
A mechanism that provides for peer communication. The most commonly used application for this protocol is the PING command. Click Next to display the “ICMP Options” window.
−GRE (Generic Routing Encapsulation):
A tunneling protocol that is used primarily for VPN (Virtual Private Networks).
•Type a protocol number in the Select by Number field.
15.Click Finish.
66