Siemens 6500 Series manual Advanced ISP Settings, Configure the ATM Virtual Circuit

6500 Series Residential Gateway User’s Guide Configuring Advanced Features

Advanced ISP Settings

The Gateway provides access to additional, advanced ISP configuration settings. All the options in this section should only be configured with the help and guidance of your ISP. Incorrect changes to any of these options could result in the failure of your Internet connection.

To access the advanced settings, click Advanced Settings from the “ISP Connection Information” window. This displays the “Advanced Internet Options” window.

The advanced options are listed below. To access one of these options, click its link on the “Advanced Internet Options” window.

Configure the ATM Virtual Circuit	Create and configure a PVC (Permanent Virtual Circuit) across a
	network. A PVC is used to maintain a permanent connection
	between two points on a network.
Add Static Routes for direct ISP	Configure static routes to remote equipment. Static routing allows a
Connections	pre-defined route to be set for the transmission of data.
View the Current Routing Table	View a table of routing information of all static and dynamic routes
	for network devices.
Set up Dynamic DNS	Set up dynamic DNS. Dynamic DNS translates IP addresses into
	alphanumeric names.

Configure the RIP protocol for advanced routing

Configure the protocol that allows the Gateway to determine the shortest path between two points on the network.

39