Mounting the Charger on a Wall

43-489rc.fm Page 11 Tuesday, October 3, 2000 10:12 AM

RadioShack’s involvement in this program is part of the compa- ny’s commitment to preserving our environment and conserving our natural resources.

MOUNTING THE TRANSMITTER ON A WALL

With the supplied hook, you can mount the transmitter on a wall. Use two 1/8-inch flat-head screws (not supplied) to attach the hook to the wall, then hang the trans- mitter over the hook.

You can mount the charger on
a wall using the supplied
mounting bracket. Use two 1/8-
inch flat-head screws (not sup-
plied) to attach the bracket to
the wall. Then slide the charger
over the mounting bracket and	Tab
pull down the charger until it
snaps into place.s

To remove the charger from the mounting bracket, press and hold the tab on the bottom of the bracket to unlock the latch, then slide the charger up.

Preparation