Mounting the Docking Station

Mount docking station to mounting system using the four 1/4-20 UNC mounting holes on the bottom of the dock. Four 1/4-20 UNC x .50 Button Head Mounting Screws are provided in the hardware bag.

*Recommended torque: 75 in-lbs. Over tightening mounting hardware may damage docking station.

*Use of hardware longer than 5/8" may damage docking station.

This docking station is designed to be used with a variety of Gamber-Johnson mounting systems. Installation instructions for other Gamber-Johnson products are provided with each individual product.

Clevis (Not Included)

(4) 1/4-20 x .50 Button Head Mounting Screws

SEVERE VIBRATION INSTALLATIONS

Gamber-Johnson recommends the use of optional Side Restraints in severe vibration applications. Side Restraints and mounting hardware are available seperatly and are assembled to the dock using four provided #8-32 x .38 flat head screws (Figure 1).

Side Restraints (optional): Angle as shown and insert into side cutouts on docking staton. Secure with prodvided #8-32 flat head screws.

Figure 1

Pg 4