Using the iB970
1.Make sure unit is connected to a working power source
2.Connect one end of a USB cable (several are included) to either USB port on the bottom of the iB970 and the other into the USB port on your device (see page 2 to match cables with devices). If needed, use the included USB converter tip to match your device’s port.
3.If needed, slide out the rubberized rest to fit your device.
Rest area for Blackberries |
or other devices |
4.Monitor your device’s battery indicator to confirm the device is charging. If the device is NOT charging, try moving the USB Mode Switch to a different posit- ion. If the device still does not charge, try unplugging the device from the USB port then reconnecting it
For |
sliding rubberized rest |
7