Driver installation Windows 2000/XP, Step

english
Table of contents
Introduction	1
Driver installation	2
Making sure installation was successful	5
Removing drivers	5

Introduction

Thanks for choosing the Replicator 2.0. It offers a sim- ple, flexible and highly scalable connectivity solution between the Notebook and any USB 1.0/1.1/2.0 com- pliant devices. The Replicator 2.0 adds one 4-Ports USB 2.0 HUB; 2 PS/2 ports; 1 RS232 port; 1 USB

2.0LAN port, which supports 10/100 Mbps transfer rate.

Of course the Replicator 2.0 can connect the latest higher performance peripherals, such as high-resolu- tion video conferencing cameras, scanners and prin- ters. You can enjoy the Replicator 2.0 to extend your USB 2.0 devices.

System requirements

•USB 2.0 host controller

•Windows 2000/XP

Package contents:

•1 x USB 2.0 Replicator 2.0

•1 x USB 2.0 A to B type cable (1800 mm)

•1 x AC Power Adapter (DC 5 V/3 A)

•1 x Driver CD

•1 x User’s manual

LED indicator description:

•Good link status

–When the USB Replicator 2.0 is connected to the PC or Notebook, all of the LED indicators will turn on. (Note: The Ethernet Linked to the Network or Internet)

•Power LED indicator

–When just the power adapter is plugged into the Replicator 2.0, the POWER LED indicator and PS/2 LED will turn on.

•Ethernet LED indicator

–When the Ethernet works correctly, the LED indi- cator will turn on the red LED.

–When the Ethernet work under 100 Mbps Net- work, the LED indicator will turn on the red and green LED at the same time.

Notes

•For the Replicator 2.0 working under stable environ- ment, please be sure to use the power adaptor.

•When the USB 2.0 HUB ports become overloaded, please refresh or re-plug the Replicator 2.0 into the Notebook to active the ports.

Driver installation

• Windows 2000/XP

Step 1:

•Insert the Driver CD into the CD-ROM drive.

•Double click the “USBPR2.0_4.00.exe” program of Driver CD to install.

Step 2: Select the language to continue.

Step 3: Click “Next” to continue.