Using the RI Dock
Setting the OSD Mode
Set the OSD (onscreen display) mode before you start using the RI Dock.
1.Plug in the AC adapter.
2.Turn on your TV and amp, and select the appropriate inputs on your TV and amp.
3.Insert your
iPod/iPhone into the | iPod/iPhone |
RI Dock. |
|
4.Select the video output mode depending on the video connection.
While pressing the remote controller’s [SETUP] button, press the Up [ 
] button for the component video connection, press the [ ] button for the composite (default) con- nection.
5. Use the remote controller’s [MODE] button to set the OSD mode.
On: Playlists (artists, albums, songs, and so on) are displayed on your TV, and you can navigate and select your music or video while looking at your TV. While this mode is selected, your iPod/iPhone displays the Onkyo logo.
Off: Nothing is displayed on your TV and you navigate and select your contents by using your iPod/iPhone model’s dis- play.
Notes:
•To prevent dock connector damage, don’t twist your iPod/iPhone when insert- ing or removing it, and be careful not to knock over the RI Dock while your iPod/iPhone is inserted.
•Don’t use the RI Dock with any other iPod/iPhone accessories, such as FM transmitters and microphones, because they may cause a malfunction.
•You can’t change the OSD mode while watching an iPod/iPhone slideshow or video.
Controlling Your iPod/iPhone without the OSD
To control your iPod/iPhone without the OSD, set the OSD mode to Off, and use the remote controller as explained on page 6.
Controlling Your iPod/iPhone with the OSD
When the OSD mode is set to On and your iPod/iPhone is inserted in the RI Dock, you can navigate and select your music or video on your TV.
Music Mode
■Playing Songs
MENU
/
SELECT
1.Press the remote controller’s [MENU] but- ton to select the Music mode.
9