Cisco Systems ONS 15600 OC48/STM 16 technical specifications OPR-High 200% OPR-Low 50%

Page 4

OC48/STM16 LR/LH 16 Port 1550 Card

Table 1 OC48/STM16 LR/LH Card Performance Monitoring Thresholds (continued)

Performance Monitoring

Thresholds (15 min./1 day)

 

 

OPR-High

200%

 

 

OPR-Low

50%

 

 

Note SONET path PMs will not count unless IPPM is enabled. For additional information, see the Enabling Intermediate-Path Performance Monitoring section in the Cisco ONS 15600 Procedure Guide. To monitor the SONET path PMs log into the far-end node directly.

Installing the Cisco ONS 15600 OC48/STM16 LR/LH 16 Port 1550 Card

4

78-15182-01

 

 

Image 4
Contents LR/LH 16 Port 1550 Card OC48/STM16 LR/LH 16 Port 1550 Slots and Connectors OC48/STM16 LR/LH 16 Port 1550 CardUAS-L PSC PSD OPR-High 200% OPR-Low 50% OC48/STM16 LR/LH 16 Port 1550 Faceplate and Block Diagram OC48 OC-48 STS-48 copyOC48/STM16 LR/LH 16 Port 1550 Card-Level Indicators OC48/STM16 LR/LH 16 Port 1550 Network-Level IndicatorsOC48/STM16 LR/LH 16 Port 1550 Specifications Specification Type DescriptionOC48/STM16 LR/LH 16 Port 1550 Card OGI Connector Pinout Replace an OC-48 CardClick the Provisioning Threshold tabs Force-Switch 1+1 Ports Force-Switch Path Protection PathsClear a 1+1 Force Switch Force-Switch 1+1 Ports section onRelated Documentation Clear a Path Protection Force SwitchObtaining Documentation World Wide Web Documentation CD-ROMOrdering Documentation Documentation FeedbackCisco.com Obtaining Technical AssistanceTechnical Assistance Center Cisco TAC Web Site