Replace an
OC48/STM16 LR/LH 16 Port 1550 Card OGI Connector Pinout
Table 5 shows the OC48/STM16 LR/LH card OGI connector pinouts.
Table 5 | OC48/STM16 LR/LH 16 Port 1550 Card OGI Connector Pinout |
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
Connector |
| OGI Pin and Card Port |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
1 |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|
|
|
|
|
|
|
|
|
|
|
| Transmit 4 | Receive 4 | Transmit 3 | Receive 3 | Transmit 2 | Receive 2 | Transmit 1 | Receive 1 |
|
|
|
|
|
|
|
|
|
|
2 |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|
|
|
|
|
|
|
|
|
|
|
| Transmit 8 | Receive 8 | Transmit 7 | Receive 7 | Transmit 6 | Receive 6 | Transmit 5 | Receive 5 |
|
|
|
|
|
|
|
|
|
|
3 |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|
|
|
|
|
|
|
|
|
|
|
| Transmit 12 | Receive 12 | Transmit 11 | Receive 11 | Transmit 10 | Receive 10 | Transmit 9 | Receive 9 |
|
|
|
|
|
|
|
|
|
|
4 |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|
|
|
|
|
|
|
|
|
|
|
| Transmit 16 | Receive 16 | Transmit 15 | Receive 15 | Transmit 14 | Receive 14 | Transmit 13 | Receive 13 |
|
|
|
|
|
|
|
|
|
|
Replace an OC-48 Card
Purpose | This procedure is used to replace a faulty |
Tools/Equipment | Replacement |
Prerequisite Procedures | None |
Required/As Needed | As needed |
Onsite/Remote | Onsite |
Warning Do not reach into a vacant slot or chassis while you install or remove a module or a fan. Exposed circuitry could constitute an energy hazard.
Note Card removal raises an improper removal (IMPROPRMVL) alarm, but this clears after the card replacement is completed.
Step 1 Log into the node where you will replace the
Cisco ONS 15600 Procedure Guide for a login procedure.
Step 2 Ensure that the card you are replacing does not carry traffic in a 1+1 group:
a.In the node view, click the Maintenance > Protection tabs.
b.Choose the first group listed under Protection Groups.
c.Verify that the slot number for the card you are replacing does not appear in the Selected Groups list. For example, if you are replacing the
d.Repeat Steps b and c for each protection group.
e.If any of the groups contain a port on the card you want to replace, perform the
Installing the Cisco ONS 15600 OC48/STM16 LR/LH 16 Port 1550 Card
8 |
| |
|